圖片僅供參考

ADS54RF63IPFP

Name: ADS54RF63IPFP
Rating: 4.7 (12 reviews)

IC ADC 12BIT PIPELINED 80HTQFP

製造商
製造商。部分 #ADS54RF63IPFP
包 80-TQFP Exposed Pad
資料表 ADS54RF63IPFP DataSheet
有現貨的618

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Rochester Electronics, LLC,Texas Instruments
Package	Bulk,Tray
ProductStatus	Active
NumberofBits	12
SamplingRate(PerSecond)	550M
NumberofInputs	1
InputType	Differential
DataInterface	Parallel
Configuration	S/H-ADC
Ratio-S/H:ADC	1:1
NumberofA/DConverters	1
Architecture	Pipelined
ReferenceType	Internal
Voltage-SupplyAnalog	3V ~ 3.6V, 5V
Voltage-SupplyDigital	3V ~ 3.6V
OperatingTemperature	-40°C ~ 85°C
Package/Case	80-TQFP Exposed Pad
SupplierDevicePackage	80-HTQFP (12x12)

概述

Description

The ADS54RF63IPFP is a high-speed 14‑bit RF analog-to-digital converter from Texas Instruments. It targets wideband RF receiver front ends, software-defined radios, radar, and other high‑data-rate applications. Key points:
- High sampling rate with 14-bit resolution for wide instantaneous bandwidth
- Differential RF analog inputs
- JESD204B (and related) serial digital interface to an FPGA/processor
- Suitable for compact board designs (package: IPFP)
- Includes features typical of RF ADCs such as calibration, clocking options, and power-management modes
Common usage: RF signal is digitized by the ADC and streamed over JESD204B/204C to a digital backend for processing (formatting, demodulation, DSP).
For specifics (exact sample rate, SINAD, SFDR, power, pinout, and evaluation boards), see TI’s ADS54RF63IPFP product page and the datasheet. An EVM is available to prototype and validate designs.

Features

Here are the typical features of the ADS54RF63IPFP (datasheet should be consulted for exact specs):
- 14-bit RF-sampling ADC
- Up to about 1 GSPS sampling rate
- RF front-end capable input bandwidth for direct RF sampling
- Differential input with programmable full-scale and input common mode
- On-chip track-and-hold
- High-speed digital outputs (JESD204B/LVDS-compatible options)
- Internal calibration with DC offset and gain correction
- External reference option (and/or internal reference)
- Low-power operation and various power-down modes
- Industrial temperature range (-40°C to +85°C)
- Package: IPFP (small-footprint) option
Note: exact figures (speed, power, interfaces, and temp range) vary by variant; please verify the specific datasheet for your part revision.

Package

Industrial Plastic Flat Package (IPFP) — TI’s plastic flat-pack, LQFP-style package for this device.

Pinout

- Pin count: 64 pins (IPFP package).
- Function: High-speed RF analog-to-digital converter (14-bit) with JESD204B serial output for direct RF digitization.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company headquartered in Dallas, Texas. It designs and manufactures a broad range of ICs, including analog and mixed-signal, data converters, microcontrollers, processors, and other semiconductor solutions for industrial, automotive, communications, and consumer markets.

Application

- Wireless infrastructure RF digitization (base stations, backhaul, MIMO SDR front-ends)
- Radar and EW/surveillance receiver systems
- Software-defined radio front-ends and prototyping
- RF test and measurement equipment (signal capture, spectrum analysis, ATE)
Note: High-speed, wide-bandwidth RF digitization with high dynamic range.

Equivalent

Direct equivalents for ADS54RF63IPFP do not exist. Use TI’s Cross Reference tool to find substitutes with the same 14‑bit, ~63–65 MSPS RF ADC specs and JESD204B/LVDS interface. Closest TI options are other RF/14‑bit ADCs in the ADS54RF/ADS54/ADS54J family. Analog Devices RF ADCs around 60–70 MSPS (e.g., AD9625, AD9627, AD9631) may cross‑reference but expect pinout/interface differences. For a precise match, contact TI.