圖片僅供參考

AD524BD

Name: AD524BD
Rating: 4.7 (12 reviews)

IC INST AMP 1 CIRCUIT 16CDIP

製造商
製造商。部分 #AD524BD
包 16-CDIP (0.300, 7.62mm)
資料表
有現貨的3466

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Analog Devices Inc.
Package	Tube
ProductStatus	Active
AmplifierType	Instrumentation
NumberofCircuits	1
SlewRate	5V/µs
GainBandwidthProduct	1 MHz
-3dbBandwidth	1 MHz
Current-InputBias	25 nA
Voltage-InputOffset	100 µV
Current-Supply	3.5mA
Voltage-SupplySpan(Min)	12 V
Voltage-SupplySpan(Max)	36 V
OperatingTemperature	-25°C ~ 85°C
MountingType	Through Hole
Package/Case	16-CDIP (0.300, 7.62mm)

概述

Description

AD524BD is a serially controlled digital potentiometer from Analog Devices. It provides a programmable resistance between its end terminals (A and B) with a wiper (W) whose position is set by a microcontroller over a SPI-like interface.
Key points:
- End-to-end resistance and wiper position are set digitally (typically 8-bit resolution, up to 256 steps).
- Interface usually includes CS, SCLK, SDI, and SDO pins.
- Used to set attenuation, gain, offset, or calibration in analog circuits.
- Power supply and electrical characteristics vary by variant; check the datasheet for the BD version’s exact specs (voltage range, current limits, volatility, packaging).
Common variants differ in volatility (volatile vs. non-volatile memory for the last wiper setting), package, and exact resistance value. Consult the AD524BD datasheet for precise figures and application notes.

Features

Here are the typical features of the AD524BD (digital potentiometer family):
- Dual digitally controlled potentiometers (two pots)
- 256-position (8-bit) wiper resolution per pot
- I2C-compatible serial interface for control
- End-to-end resistance options (selectable values such as 10 kΩ, 50 kΩ, 100 kΩ, etc.)
- Configurable as potentiometer or rheostat per channel
- Non-volatile and/or volatile memory options to retain wiper settings
- Low-power operation; wide single-supply range (approximately 2.7–5.5 V)
- 8-pin package; industrial temperature variants available
Note: exact end-to-end resistance, memory type, and temperature range depend on the specific BD variant you choose—refer to the datasheet for precise specs.

Package

AD524BD is an 8‑pin digital potentiometer in a Plastic DIP (DIP‑8) package. It is also available in an 8‑pin SOIC (SOIC‑8) per the datasheet.

Pinout

- Pin count: 8 pins (DIP-8/SOIC-8)
- Function: Single-channel digital potentiometer (A, B ends and W wiper) with a serial (SPI-like) interface. Terminals: A, B, W plus power (VDD, VSS) and control pins (CS, SCLK, SI). The wiper position is programmable to adjust the resistance between A and B; end-to-end resistance is variant-specific per datasheet.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- Company type: A multinational American semiconductor company that designs and manufactures high-performance analog, mixed-signal, and digital signal processing ICs, sensors, and related products for industrial, automotive, communications, and consumer markets.

Application

AD524BD is a digitally programmable potentiometer (digipot). Typical applications: programmable gain/attenuation in op-amp paths and ADC/DAC front ends; biasing, offset trimming and reference scaling in instrumentation; programmable voltage dividers for calibration and sensor conditioning; audio volume control and attenuation in consumer audio; programmable feedback networks in control loops; and test/automation equipment needing repeatable, adjustable resistance.