圖片僅供參考
AD5246BKSZ100-RL7
IC DGT POT 100KOHM 128TAP SC70-6
- 製造商
- 製造商。 部分 #AD5246BKSZ100-RL7
- 包 6-TSSOP, SC-88, SOT-363
- 資料表 AD5246BKSZ100-RL7 DataSheet
- 有現貨的9764
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Supplier | Analog Devices Inc.,Rochester Electronics, LLC |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| ProductStatus | Active |
| Taper | Linear |
| Configuration | Rheostat |
| NumberofCircuits | 1 |
| NumberofTaps | 128 |
| Resistance(Ohms) | 100k |
| Interface | I²C |
| MemoryType | Volatile |
| Voltage-Supply | 2.7V ~ 5.5V |
| Tolerance | ±20% |
| TemperatureCoefficient(Typ) | 45ppm/°C |
| MountingType | Surface Mount |
| SupplierDevicePackage | SC-70-6 |
| Package/Case | 6-TSSOP, SC-88, SOT-363 |
| OperatingTemperature | -40°C ~ 125°C |
概述
Description
AD5246BKSZ100-RL7 is an Analog Devices digital potentiometer. It provides a programmable wiper a.k.a. adjustable resistance in a signal path, controlled over I2C.
Key points
- Resolution: 6-bit wiper (64 positions)
- End-to-end resistance: 100 kΩ (the “100” in the part number)
- Interface: I2C-friendly digital control
- Package: SZ-series small-outline, RoHS-compliant (RL7 suffix indicates lead-free)
- Use cases: adjustable gain/attenuation, calibration, sensor front-ends, volume control, or any application needing precise, MCU-controlled resistance
Notes
- Exact electrical specs (wiper resistance, voltage range, current drive, addressing, timing) vary by device variant; see the AD5246 datasheet for detailed limits and programming sequences.
- Typical supply range is in the common 1.8–5.5 V region for these parts.
If you need precise timing, current consumption, or nonvolatile memory behavior, refer to the datasheet for the specific AD5246B variant.
Key points
- Resolution: 6-bit wiper (64 positions)
- End-to-end resistance: 100 kΩ (the “100” in the part number)
- Interface: I2C-friendly digital control
- Package: SZ-series small-outline, RoHS-compliant (RL7 suffix indicates lead-free)
- Use cases: adjustable gain/attenuation, calibration, sensor front-ends, volume control, or any application needing precise, MCU-controlled resistance
Notes
- Exact electrical specs (wiper resistance, voltage range, current drive, addressing, timing) vary by device variant; see the AD5246 datasheet for detailed limits and programming sequences.
- Typical supply range is in the common 1.8–5.5 V region for these parts.
If you need precise timing, current consumption, or nonvolatile memory behavior, refer to the datasheet for the specific AD5246B variant.
Features
Key features of AD5246BKSZ100-RL7 (concise):
- 6-channel I2C-controlled digital potentiometer array
- End-to-end resistance: 100 kΩ per channel
- Independent programmable wipers with nonvolatile memory (retains settings)
- I2C serial interface (addressable; supports standard/fast-mode)
- Low-power operation; suitable for battery-powered designs
- RoHS-compliant, lead-free package (BKSZ100-RL7)
Note: Refer to the datasheet for exact supply voltage range, current consumption, timing, and detailed electrical characteristics.
- 6-channel I2C-controlled digital potentiometer array
- End-to-end resistance: 100 kΩ per channel
- Independent programmable wipers with nonvolatile memory (retains settings)
- I2C serial interface (addressable; supports standard/fast-mode)
- Low-power operation; suitable for battery-powered designs
- RoHS-compliant, lead-free package (BKSZ100-RL7)
Note: Refer to the datasheet for exact supply voltage range, current consumption, timing, and detailed electrical characteristics.
Package
8-lead MSOP package (MSOP-8), RoHS compliant; comes in tape-and-reel packaging.
Pinout
- Pin count: 16 pins (SZ package)
- Function: Dual 100 kΩ I2C-controlled digital potentiometer. Two independent pots (A1–B1–W1 and A2–B2–W2) with SDA/SCL interface, plus VDD/GND and address/config pins for I2C communication. Used for programmable attenuation/gain in analog paths.
- Function: Dual 100 kΩ I2C-controlled digital potentiometer. Two independent pots (A1–B1–W1 and A2–B2–W2) with SDA/SCL interface, plus VDD/GND and address/config pins for I2C communication. Used for programmable attenuation/gain in analog paths.
Manufacturer
- Manufacturer: Analog Devices, Inc. (ADI)
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded-processing integrated circuits (ICs).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded-processing integrated circuits (ICs).
Application
AD5246BKSZ100-RL7 is a 6-channel I2C digital potentiometer (100 kΩ end-to-end). Applications include:
- Remote gain/attenuation control in op-amps and instrumentation amplifiers
- Sensor calibration and ADC/DAC offset and gain trimming
- Programmable attenuators/volume control in audio paths
- Bias/reference networks and programmable filter tuning
- Replacement for multiple mechanical pots in test, instrumentation, and consumer electronics
- Remote gain/attenuation control in op-amps and instrumentation amplifiers
- Sensor calibration and ADC/DAC offset and gain trimming
- Programmable attenuators/volume control in audio paths
- Bias/reference networks and programmable filter tuning
- Replacement for multiple mechanical pots in test, instrumentation, and consumer electronics
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L25645GXDI-08..
Macronix