圖片僅供參考

AD5242BRUZ10

Name: AD5242BRUZ10
Rating: 4.7 (12 reviews)

IC DGT POT 10KOHM 256TAP 16TSSOP

製造商
製造商。部分 #AD5242BRUZ10
包 16-TSSOP (0.173, 4.40mm Width)
資料表
有現貨的7316

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Analog Devices Inc.
Package	Tube
ProductStatus	Active
Taper	Linear
Configuration	Potentiometer
NumberofCircuits	2
NumberofTaps	256
Resistance(Ohms)	10k
Interface	I²C
MemoryType	Volatile
Voltage-Supply	2.7V ~ 5.5V, ±2.3V ~ 2.7V
Features	Selectable Address
Tolerance	±30%
TemperatureCoefficient(Typ)	30ppm/°C
MountingType	Surface Mount
SupplierDevicePackage	16-TSSOP
Package/Case	16-TSSOP (0.173, 4.40mm Width)
OperatingTemperature	-40°C ~ 105°C

概述

Description

AD5242BRUZ10 is an Analog Devices dual digital potentiometer. It provides two programmable resistive networks (two pots) whose wiper positions are controlled by a serial I2C-compatible interface. Each pot forms a voltage divider you can adjust digitally to trim, set gains, attenuate signals, or calibrate sensors in analog circuits. The BRUZ10 suffix indicates the specific package/revision and temperature rating for that device version; exact details (end-to-end resistance, number of steps, volatile vs. nonvolatile behavior, timing, and address options) are specified in the datasheet. In short: a two-channel, I2C-controlled digipot for precise, software-driven resistance tuning in compact packages.

Features

Here are the key features of AD5242BRUZ10 (dual digital potentiometer):
- Dual 8-bit digital potentiometers (two independent wipers, 256 positions per channel)
- End-to-end resistance: 10 kΩ
- I2C-compatible serial interface for control
- Independent wiper registers with fast update
- Single-supply operation: typically 2.7 V to 5.5 V
- Industrial temperature range: -40°C to +125°C
- Low power consumption
- 8-lead package (MSOP/LFCSP family variant as in BRUZ10
- Applications: programmable gain/attenuation, sensor calibration, offset adjustment, attenuation/volume control
Note: Always refer to the latest datasheet for exact voltage range, temperature, and package details.

Package

MSOP-8 (8-lead MSOP) package.

Pinout

- Pin count: 8 pins (in an 8‑lead package such as MSOP/SOIC).
- Function: I2C‑controlled digital potentiometer (single potentiometer) with ends A and B and wiper W, plus VDD, GND, SDA, and SCL for interface.

Manufacturer

Analog Devices, Inc. (ADI). It is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits.

Application

Applications:
- Programmable gain/attenuation and offset trimming in instrumentation and op-amp circuits
- Programmable attenuators and volume controls in audio/video paths
- Sensor calibration and DC trimming in data acquisition and process-control systems
- Programmable filter networks and impedance matching
- Calibration networks for automated test equipment and servo/motor-control loops

Equivalent

Equivalent parts depend on the same end-to-end resistance, number of pots, and interface. Closest cross-references to AD5242BRUZ10 are Analog Devices AD5252 (dual I2C digipot). Other vendors offer dual digipots (e.g., Microchip MCP41/42 families; Renesas/NXP equivalents). For an exact cross, provide RAB (end-to-end resistance), taper type, and required interface.