圖片僅供參考
4N35S-TA1
OPTOISO 3.55KV TRANS W/BASE 6SMD
- 製造商
- 製造商。 部分 #4N35S-TA1
- 包
- 資料表
- 有現貨的19543
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Series | 4N3X |
| Part Status | Active |
| Base Product Number | 4N35 |
| Number of Channels | 1 |
| Voltage - Isolation | 3550Vrms |
| Current Transfer Ratio (Min) | 100% @ 10mA |
| Rise / Fall Time (Typ) | 3µs, 3µs |
| Input Type | DC |
| Output Type | Transistor with Base |
| Voltage - Output (Max) | 30V |
| Current - Output / Channel | 100mA |
| Voltage - Forward (Vf) (Typ) | 1.2V |
| Current - DC Forward (If) (Max) | 60 mA |
| Vce Saturation (Max) | 300mV |
| Operating Temperature | -55°C ~ 100°C |
| Mounting Type | Surface Mount |
| Package | 6-SMD, Gull Wing |
| Supplier Device Package | 6-SMD |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
概述
Description
4N35S-TA1 is a variant of the classic 4N35 optocoupler (photocoupler). It provides galvanic isolation between input and output via an infrared LED on the input side and an NPN phototransistor on the output side. The “S-TA1” suffix denotes a specific packaging/lot variant; check the exact datasheet for its ratings.
How it works: drive the input LED with a forward current; light drives the output transistor. The output is open-collector and requires a pull-up resistor to a logic supply.
Key points:
- Input: LED forward voltage ~1.2–1.4 V; recommended IF ≈ 5–20 mA (max higher).
- Output: NPN phototransistor; CTR varies with IF and temperature (broad range, typically tens to a few hundred percent).
- Isolation: ~5 kV RMS (model-dependent).
- Interface: LED on one side, transistor on the other; use pull-up on output.
Applications: microcontroller/PLC isolation, level shifting, signal conditioning, and safety-critical interfaces. Always verify CTR, VCEO, and pinout in the specific 4N35S-TA1 datasheet.
How it works: drive the input LED with a forward current; light drives the output transistor. The output is open-collector and requires a pull-up resistor to a logic supply.
Key points:
- Input: LED forward voltage ~1.2–1.4 V; recommended IF ≈ 5–20 mA (max higher).
- Output: NPN phototransistor; CTR varies with IF and temperature (broad range, typically tens to a few hundred percent).
- Isolation: ~5 kV RMS (model-dependent).
- Interface: LED on one side, transistor on the other; use pull-up on output.
Applications: microcontroller/PLC isolation, level shifting, signal conditioning, and safety-critical interfaces. Always verify CTR, VCEO, and pinout in the specific 4N35S-TA1 datasheet.
Features
Here are the common features of the 4N35S-TA1 optocoupler:
- Photocoupler with LED input and NPN phototransistor output
- Electrical isolation between input and output (up to ~5 kV RMS)
- DIP-6 through-hole package (TA1 variant in the 4N35 family)
- Input: LED forward current typically 5–20 mA (IF); Vf ≈ 1.2 V at 20 mA (max ratings given in datasheet)
- Output: Phototransistor can sink current; VCEo around 35 V (max), IC up to ~50 mA
- CTR (current transfer ratio) wide range and temperature dependent (typical broad range; used to determine drive current)
- Good noise immunity and simple interface to logic or microcontrollers
- Operating temperature range typically industrial (-40°C to +85°C)
Applications: isolated signal interfaces, microcontroller interfacing, safety-critical isolation, noise rejection.
- Photocoupler with LED input and NPN phototransistor output
- Electrical isolation between input and output (up to ~5 kV RMS)
- DIP-6 through-hole package (TA1 variant in the 4N35 family)
- Input: LED forward current typically 5–20 mA (IF); Vf ≈ 1.2 V at 20 mA (max ratings given in datasheet)
- Output: Phototransistor can sink current; VCEo around 35 V (max), IC up to ~50 mA
- CTR (current transfer ratio) wide range and temperature dependent (typical broad range; used to determine drive current)
- Good noise immunity and simple interface to logic or microcontrollers
- Operating temperature range typically industrial (-40°C to +85°C)
Applications: isolated signal interfaces, microcontroller interfacing, safety-critical isolation, noise rejection.
Package
It's a 6-pin DIP optocoupler in a plastic through‑hole package (DIP-6).
Pinout
6 pins. It’s an optocoupler (phototransistor output). Input LED: pin 1 (anode) and pin 2 (cathode). Output transistor: pin 4 (collector) and pin 3 (emitter). Pins 5 and 6 are no-connect.
Manufacturer
Manufacturer: Vishay Intertechnology (Vishay).
Type of company: A global manufacturer of electronic components, including semiconductors and passive components (and related optoelectronic devices such as optocouplers).
Type of company: A global manufacturer of electronic components, including semiconductors and passive components (and related optoelectronic devices such as optocouplers).
Application
4N35S-TA1 is a phototransistor optocoupler. Common applications:
- Galvanic isolation between microcontrollers/logic and high-voltage or noisy field circuits
- Isolated interfaces for sensors, transducers, and instrumentation
- Isolated feedback and control in switch-mode power supplies (SMPS) and lamp drivers
- Signal level shifting and buffering with noise immunity
- PLC/industrial automation I/O isolation and safe interfacing
- Educational/hobbyist projects needing low-cost, isolated signal coupling
- Galvanic isolation between microcontrollers/logic and high-voltage or noisy field circuits
- Isolated interfaces for sensors, transducers, and instrumentation
- Isolated feedback and control in switch-mode power supplies (SMPS) and lamp drivers
- Signal level shifting and buffering with noise immunity
- PLC/industrial automation I/O isolation and safe interfacing
- Educational/hobbyist projects needing low-cost, isolated signal coupling
Equivalent
4N35S-TA1 is a standard phototransistor optocoupler. Common equivalents/cross‑refs include:
- PC817
- EL817
- LTV-817/LTV-817A
- SFH618A
Also consider other 4N35/4N25 family devices from vendors like Vishay. Always verify CTR, input current, and pinout before substituting.
- PC817
- EL817
- LTV-817/LTV-817A
- SFH618A
Also consider other 4N35/4N25 family devices from vendors like Vishay. Always verify CTR, input current, and pinout before substituting.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V4035FZUI
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29F040CQI-70G
Macronix
-
MX25L25645GXDI-08..
Macronix